Guide

Installation without tools

Using the Sportster Push Rod Cover as an example. The steps for every part are also in its description.

Sportster Push Rod Cover

Three steps.

  • Push Rod Cover ansetzen1

    Place the push rod covers

    Place the push rod covers (2x LH, 2x RH) at the top of the pushrod, slide them up a little and press them over the pushrod at the bottom.

  • Base Cover aufdrücken2

    Press on the base covers

    Press the base covers over the bolts of the tappet blocks.

  • Fertig3

    Done

    No screws needed. The click-on system holds even with vibration and while riding.

Good to know

Installation tips

  • All parts are marked LH (left) and RH (right).
  • The stock parts stay on – nothing is taken apart.
  • To go back to stock, just take the covers off.
  • Questions? Send us a photo on WhatsApp.

FAQ

Installation questions

Question not listed? Send us a photo of your engine – we’ll tell you what fits.

How long does installation take?

The covers go on without tools. How long it takes depends on the part – the steps are in the description of each part.

Do I have to unbolt anything?

No. The stock parts stay on, the rocker box stays closed.

Do the covers stay on while riding?

The click-on system holds firmly – even with vibration and while riding.

How do I tell left from right?

All parts are marked LH (left) and RH (right).